Search Results for: leather

The KTM 790 DUKE has a reputation. Not only is it known to be devastatingly accurate, with the unmatched agility you’d expect from a single, merged with the meaty punch of a twin, but for being a no-nonsense street-brawler. Boasting an uncompromised 799 cc LC8c parallel twin motor nestled into one of the lightest and most compact chassis around, the KTM 790 DUKE is all about being fast where it counts – in the corners.

TFT DISPLAY
A multicolor combination of relevant information, presented in an uncluttered way. As you rev the engine, the display bars change color, either spurring you on or warning you that the engine’s still cold. The display also automatically adapts its illumination to the ambient light and gets racy when “Track mode” is selected.

BODYWORK
100% DUKE. Purposefully NAKED and proud of it, the KTM 790 DUKE presents an aggressive stance, boasting aggressive lines and clearly obvious intentions. As the original scalpel, it’s sharp, to the point, and leaves nothing covered. 

LED HEADLIGHT
With an LED headlight adding to the KTM 790 DUKE’s menacing look and subtracting from the darkness, illumination is taken care of when charging into the night. Flanked by two LED strips that function as running lights, being seen during the daylight hours is taken care of too. 

ENGINE
Developed for torque, this liquid-cooled 8-valve, DOHC unit delivers 87 Nm at 8000 rpm, almost immediately followed by a roaring 105 hp finale – 95 hp version for the L model that is available in certain markets. Meanwhile, an advanced ride-by-wire system guarantees great refinement as well as low fuel consumption and emission figures. It roars too. 

RIDE MODES
Riders can choose from four ride modes, namely SPORT, STREET, RAIN, and TRACK. Naturally, STREET MODE is the default, making for comfortable urban riding, with RAIN MODE taking care of things when they get a little slippery. SPORT MODE is used when needing to dial things up a notch, with TRACK MODE giving KTM 790 DUKE pilots full power output, and the ability to dial down the traction control, smooth out the throttle, and switch off the anti-wheelie for rear wheel antics. 

MOTORCYCLE TRACTION CONTROL
Motorcycle Traction Control is a mouthful, but it’s an important part of the KTM 790 DUKE. MTC is a lean-angle sensitive traction control system, which reduces engine output extremely smooth, barely perceptible. Depending on the selected ride mode, MTC also allows for several levels of traction slip at the rear wheel. But that’s not the end of it – Daredevils, we give you: the off-switch! 

MOTOR SLIP REGULATION
The KTM 790 DUKE is equipped with standard MSR, or Motor Slip Regulation, which works in the opposite direction of the MTC. This means there is no chance of accidentially locking up the rear wheel under downshifting or abrupt throttling-off. MSR ensures you retain full traction and complements the slipper clutch and is especially effective in low grip situations.

ERGONOMICS
The KTM 790 DUKE is an aggressive motorcycle with easy rider ergonomics. This is the key to its long-standing success. A narrow chassis and engine, comfortable seat height, upright seating position, and spacious legroom don’t sacrifice cornering clearance on the street, while the footpegs allow for extreme lean angles when cutting into the canyons. 

SEAT
At 825 mm, both shorter and taller riders can enjoy the bike at full tilt, without losing sight of the daily usability. The seat cover is grippy but still allows the rider to move around the bike easily. It has been developed to work with textile and leather, in keeping with the wide range of riders and riding styles. The pillion seat cover uses the same material and combines sharp looks with passenger comfort. 805 mm is possible with the lower KTM PowerParts seat.

FOOTPEGS
Cast from aluminum, the foot pegs fitted to the KTM 790 DUKE cater to a comfortable riding position, while still creating maximum ground clearance allowing for impressive lean angles. Reverse shifting is possible without any additional parts. Adjustable foot pegs are also available as a KTM PowerParts option for those who would like to go all out.

FRAME
The incredible handling characteristics of the KTM 790 DUKE are founded on the dynamic, loadbearing design of the tubular chassis. Engineers had one goal in mind, and that was to keep the chassis as rigid and compact as possible for sharper turn-in and greater lean angles, allowing it to slice through the turns with extreme responsiveness.

SWINGARM
The die-cast, open-lattice swingarm is meticulously manufactured and has been optimized for stiffness and stability while still offering excellent flex characteristics. By using a direct link for the rear shock, complexity and parts are reduced.

FORK
A 43 mm open cartridge upside-down front fork from WP Suspension takes care of any front wheel articulation, using split function technology. This means that compression and rebound damping take place in separate fork legs, allowing for better tuning of the fork behavior. The fork springs are progressive, ensuring a smooth operation throughout the fork stroke, being softer for the initial stroke, and harder further down the stroke to prevent bottoming out.

REAR SHOCK
Making sure the rear wheel behaves when the going gets fast, is a high-quality gas-assisted WP APEX rear shock, featuring progressive spring and preload adjustment. This means the KTM 790 DUKE maintains a sporty ride quality, while still being comfortable enough for longer trips.

WHEELS AND TIRES
The KTM 790 DUKE is fitted with extremely lightweight, light-alloy wheels manufactured using a low-pressure die-casting process. Not only do the lightweight wheels subtract from the overall weight, but they also minimize the unsprung rotating masses and are wrapped in a set of MAXXIS Supermaxx ST tires. 

BRAKES
Maximum deceleration is ensured at the front wheel on the KTM 790 DUKE by the two radially mounted four-piston fixed calipers and two 300 mm discs. The spacing between front brake lever and handlebar is adjustable so that the lever is within easy reach for every rider. The front brake receives effective support from the disc brake on the rear wheel, which features a single disc and a single piston floating caliper.

Hitting every target with devastating accuracy, the all-new KTM 990 DUKE brings unmatched levels of precision to the street. Packing 123 HP and 103 Nm into an all-new frame, with adjustable WP APEX suspension and highly tuned electronics to boot, this – put simply – is the lightest, sharpest, most performance focused mid-class NAKED motorcycle to ever wear the DUKE nameplate.

ADJUSTABILITY
Precision and setup go hand-in-hand. In this case, 5-click adjustability on both the WP APEX 43 mm front fork and the WP APEX rear shock provide the ideal setup for maximum attack, while an adjustable handlebar and levers ensure the perfect posture for hitting the bullseye, everytime. 

TFT DISPLAY AND CONNECTIVITY
An all-new 5″ bonded glass TFT dashboard is upgraded with he latest graphic and information software, making it faster, easier to navigate and designed to give riders faster access to the various features of the bike with far fewer clicks. The TFT also works in conjunction with optional KTMConnect, which connected with your smartphone to the dash to access navigation, audio and calls. A USB-C connection is also available for charging your smart device. 

BODYWORK
Purposefully NAKED devoid of any clutter but packed with attitude. Wicked at standstill, and imposing on the move, the The KTM 990 DUKE debuts an all new look for DUKE, boasting aggressive lines and design elements that shout POWER! This new design is further set off with two unique colorway options of Black and Orange, celebrating 30 years of DUKE. 

LED HEADLIGHT
An all-new, lightweight LED headlight design adds to the KTM 990 DUKE’s menacing look while turning night to day. With daytime running lights that automatically adjust in intensity according to the ambient light conditions, and automatic low beam that stays illuminated for a moment after the ride is done, not only do the LEDs on KTM 990 DUKE burn a hole into the darkness – it is smart too. 

ENGINE
Of course, this isn’t the first time the DUKE nameplate and 990 have been seen together. However, this machine is a completely different powerplant. Nestled into the all-new frame is a 947 cc LC8c parallel-twin engine, pumping out 123 HP and 103 Nm. Not only powerful, it is also the most compact twin in class, adding to the KTM 990 DUKE’s nimble handling characteristics. More aggressive camshaft profiles and longer valve openings result in improved rideability, while a wider radiator with optimized airflow ensures things stay cool. A new exhaust system rounds off this powerhouse package. 

RIDE MODES
Configurable with up to 5 different ride modes, the KTM 990 DUKE is ready to dominate just about any eventuality. In the default STREET setting, riders have full power, traction control, and limited front wheel lift, with easy throttle response. SPORT steps the experience up with sharper throttle control and some wheel slip, while RAIN mode does what it says on the box, providing maximum traction and reduced power in wet conditions. The optional PERFORMANCE and TRACK modes crank the KTM 990 DUKE all the way to 11, providing enhanced rider customization and focused sport riding. 

TRACK MODE
Toggle the optional TRACK mode, and the KTM 990 DUKE goes from a no-holds-barred NAKED street motorcycle to an all-out apex-brawling race machine. TRACK mode allows you to take full control of rear wheel traction with a 10-level slip control, as well as the sharpest throttle response possible. Want more? How about 5 levels of anti-wheelie, and maximum acceleration thanks to LAUNCH CONTROL! 

LAUNCH CONTROL
Unleashing maximum acceleration from a standing start, the KTM 990 DUKE is fitted with LAUNCH CONTROL for rapid starts off the line. Simply select launch control, wind on the throttle, drop the clutch, and blast off the line. 

ERGONOMICS
The brief for the 2024 KTM 990 DUKE was simple; develop the ultimate mid-weight street bike. The result is the lightest, most precise, most performance-focused mid-class NAKED, providing unmatched rider feedback, performance, and comfort in all riding scenarios. What’s more, the KTM 990 DUKE is designed to inspire confidence in all riders, from beginners looking for a little more, all the way up to advanced riders who want to rip up the tarmac. 

SEAT
At 825 mm tall and with a 2° tilt upfront, the rider seat on the KTM 990 DUKE has been specifically developed to provide a sporty, aggressive seating position, without compromising on comfort. The seat cover is also designed to provide the sweet spot between grip and freedom of movement, for both textile and leather riding gear. 

FOOTPEGS
Made from high-strength, lightweight aluminum, with a non-slip rubber insert, the footpegs ensure grip and provide some vibration damping. The pillion hasn’t been forgotten either, with emphasis placed on passenger comfort thanks to a more comfortable knee angle.

FRAME
The KTM 990 DUKE has been developed with a completely new tubular frame, with torsional stiffness and rider feel as a top priority, thanks to the use of forged parts over sheet metal and an integrated swingarm pivot point, adding additional stiffness. An aluminum diecast subframe integrates the airbox and air intakes under the seat, reducing weight. 

SWINGARM
Featuring a new lightweight, gravity die-cast swingarm, the KTM 990 DUKE boasts increased stability and perfect levels of flex. Why flex you ask? City streets and rural backroads aren’t perfect, and even small bumps can affect handling. The increased flex of the swingarm dramatically improves bump absorption, improving the effectiveness of the rear shock, and feedback to the rider. 

FORK
Keeping the front end in check, WP APEX 43 mm is an adjustable, open cartridge upside-down front fork which provides 140 mm of suspension travel, and uses split function technology to control compression and rebound damping in separate fork legs. The front fork can be easily and simply adjusted in a 5-click setting for both compression and rebound to suit rider skills and road conditions. 

REAR SHOCK
The high-quality gas-assisted WP Apex Monotube rear shock absorber is fitted with a new lighter linear spring which, together with a newly developed setting, offers riders enhanced responsiveness and comfort. Rebound can also be adjusted through a 5-click setting, as well as manual preload adjustment. 

WHEELS AND TIRES
A set of grippy Bridgestone S22 tires – 120/70-R17 on the front and 180/55-R17 on the rear – are wrapped around a set of lightweight, alloy wheels, delivering excellent performance in various road conditions.

BRAKES
When the going gets quick, the slowing needs to match. Upfront, twin lightweight 300 mm floating disks are paired with 4 piston radially mounted calipers, with a 240 mm disc on the rear. These are mated to a tried and tested anti-lock braking system, with Supermoto ABS functionality. 

The KTM 790 DUKE is as surgical as its nickname suggests. With the agility, you’d expect from a single, combined with the hard-hitting punch of a twin, the KTM 790 DUKE slices up the road with pinpoint precision. With a 799 cc LC8c parallel twin motor – the most compact in its class – nestled into one of the lightest frames around, the KTM 790 DUKE is all about being fast everywhere, with the corners being its playground.

ENGINE
Built for torque, the liquid cooled 8 valve unit has been tuned to punch out a healthy 70 kW (95 hp) and 87 Nm, with the ability to reduce power to 35 kW (48 hp) and 76 Nm to comply with A2 motorcycle license regulations.

CYLINDER HEAD
The 8 valve DOHC cylinder head contains twin chain-driven camshafts and one sparkplug per cylinder. Additionally, the camshafts in the KTM 790 DUKE are assembled, which makes them even lighter than forged camshafts. DLC coated finger followers, steel valves and a hydraulic chain tensioner complete the cylinder head assembly.

BALANCER SHAFTS
No one enjoys unpleasant vibes. That is why the KTM 790 DUKE employs the use of two balancer shafts, the first placed in front of the crankshaft and the second in the cylinder head to ensure the smoothest power delivery and minimal vibration.

CYLINDERS
Nikasil coated aluminum cylinders are an integral part of the sleeveless engine casing design of this 799 cc parallel twin. This open deck cylinder construction allows for optimal cooling, improved production tolerances and reliability. 

PISTONS
Forged pistons with three piston rings, combined with a DLC (Diamond Like Coating) coated piston pin allow for lighter piston construction. This minimizes reciprocating weight, which reduces rotating masses, improving overall handling, and maximizing the rev-ceiling of the engine.

CRANKCASE
The KTM 790 DUKE features horizontally split crankcases, which are aluminum high pressure cast, allowing for reduced wall thickness and less weight.

PASC CLUTCH
The slipper clutch allows riders to enter corners confidently without locking up the rear wheel under hard deceleration or when downshifting, and remaining feather-light on the clutch finger.

OIL CIRCULATION
The engine employs a compact, semi-dry sump system with oil being actively pumped out of the crank case, clutch housing, and gearbox. This ensures any unnecessary oil flow through the motor, reducing power loss through friction. To cool down the oil, the engine is equipped with an oil cooler like that fitted to the larger LC8 engines.

RIDE-BY-WIRE
Instead of the electronic injection system’s throttle valves being controlled by cables, ride-by-wire processes throttle twist grip movements with the help of electronic sensors and activates the throttle valves accordingly using servo motors. However, our ride-by-wire on the KTM 790 DUKE goes the extra mile: It electronically translates the throttle commands of the rider into the best throttle valve positions for the current riding situation. Choking, jolting and involuntary wheelies are a thing of the past. Voluntary ones, however, could easily be a thing of your future.

EXHAUST
A stainless-steel thing of beauty. The middle damper centralizes the mass and allows for a relatively small muffler that plays a dramatic soundtrack. Hundreds of test bench runs and complex simulations ensured that this exhaust system contributes decisively to the tractable torque curve and excellent emission standards.

AIRBOX
The airbox sits snugly inside the subframe, with the air intake on either side of the subframe, allowing the bike to keep things cool while you gun it.

FRAME
The incredible handling characteristics of the KTM 790 DUKE are founded on the dynamic, loadbearing design of the tubular chassis. Engineers had one goal in mind, and that was to keep the chassis as rigid and compact as possible, which allows for sharper turn-in and greater lean angles, allowing it to slice through the turns with extreme responsiveness.

SUBFRAME
The subframe is cast aluminum and houses the airbox. No plastic covers, no additional brackets – everything is cast into two connected pieces to reduce complexity and weight. The triangular shapes in the subframe were inspired by KTM’s trellis subframes, as this allows for a strong and simple construction.

SWINGARM
The die-cast, open-lattice swingarm is meticulously manufactured and has been optimized for stiffness and stability while still offering excellent flex characteristics. By using a direct link for the rear shock, complexity and parts are reduced.

WHEELS
The KTM 790 DUKE is fitted with extremely lightweight alloy wheels, manufactured in a low-pressure die casting process. Not only do the lightweight wheels make the bike lighter overall, but they also minimize the unsprung masses and moment of inertia, with a positive impact on the handling and riding dynamics.

TIRES
The MAXXIS Supermaxx ST tires have been specifically developed for the KTM 790 DUKE. Thanks to a special compound, the tires are grippy in both wet and dry conditions, striking the perfect balance between sportiness and everyday rideability, offering the rider a stable ride and excellent tire wear.

SUSPENSION
Specifically developed WP APEX suspension takes care of both front and rear wheels. This is paramount in the handling characteristics of the KTM 790 DUKE, with the equally impressive suspension component quality and performance usually only seen on motorcycles in higher classes.

FRONT FORK
A 43 mm open cartridge upside-down front fork from WP Suspension takes care of any front wheel articulation, using split function technology. This means that compression and rebound damping take place in separate fork legs, allowing for better tuning of the fork behavior. The fork springs are progressive, ensuring a smooth operation throughout the fork stroke, being softer for the initial stroke, and harder further down the stroke to prevent bottoming out.

REAR SHOCK
Making sure the rear wheel behaves when the going gets fast, is a high-quality gas-assisted WP APEX rear shock, featuring progressive spring and preload adjustment. This means the KTM 790 DUKE maintains a sporty ride quality, while still being comfortable enough for longer trips. 

STEERING DAMPER
This reliable and sensitive WP steering damper has been setup to give the rider ultimate feedback through the bars, while keeping the front wheel uncompromised over uneven tarmac. You won’t even know it’s there, until that one nasty bit of road comes up mid corner.

TRIPLE CLAMPS
The cast aluminum triple clamp stiffness has been tuned to match the flex of the fork, contributing to the sporty handling and excellent feedback. Clever engineering of the triple clamps and the handlebar clamps mean four different handlebar positions are possible for that perfect riding position.

BRAKES
Maximum deceleration is ensured at the front wheel on the KTM 790 DUKE by the two radially mounted four-piston fixed calipers and two 300 mm discs. The spacing between hand brake lever and handlebar is adjustable so that the lever is within easy reach for every rider. The front brake receives effective support from the disc brake on the rear wheel, which features a single piston floating caliper, clamping down on a single disc. All this stopping power is supported by KTM’s Cornering ABS.

FUEL TANK
Holding 14.3 litres of fuel, the KTM 790 DUKE is ready to attack mountain passes miles away. And combined with a fuel consumption of 4,4 l / 100 km, you’ll be hunting apexes for hours. 

HANDLEBAR
A tapered aluminum, 810 mm wide handlebar puts you in full control. Adjustable in 4 positions on the triple clamp, which can also be rotated by a further three positions, allowing for that perfect riding position.

HAND LEVERS
Grabbing a handful of front brake or reaching for the clutch is made extra easy with span adjustable levers. 

FOOTPEGS
Cast from aluminum, the foot pegs fitted to the KTM 790 DUKE cater for a comfortable riding position, while still creating maximum ground clearance allowing for impressive lean angles. Reverse (race) shifting is possible without any additional parts. Adjustable foot pegs are also available as a KTM PowerParts option for those who would like to go all out.

SEATS
At 825 mm, both shorter and taller riders can enjoy the bike at full tilt, without losing sight of the daily usability. The seat cover is grippy but still allows the rider to move easily around the bike. It has been developed to work with textile and leather, and catering for a wide range of riders and riding styles. The pillion seat cover uses the same material and combines sharp looks with passenger comfort. An optional KTM PowerParts seat can reduce the seat height to 805 mm.

TFT DASHBOARD
A multicolor combination of relevant information, presented in an uncluttered way. As you rev the engine, the display bars change color, either spurring you on or warning you that the engine’s still cold. The display also automatically adapts its illumination to the ambient light and gets racy when the optional TRACK MODE is selected.

LED LIGHTS
Instantly recognisable and 100% DUKE, the KTM 790 DUKE rips into the darkness with a unique LED headlight and LED taillight following the design direction started by the KTM 1290 SUPER DUKE R. The high-performance LED headlight, flanked by two LED strips that function as daytime running lights, ensures maximum illumination and instant street-cred.

RAIN MODES
Riders can choose from four ride modes, namely: SPORT MODE for more aggressive riding, STREET MODE for comfortable urban riding, RAIN MODE for when things get a little slippery, and the ultimate attack mode – TRACK. This gives KTM 790 DUKE pilots full power output, the ability to dial down the traction control, smooth out the throttle, switch off the anti-wheelie for rear wheel antics. 

RIDER AIDS
The KTM 790 DUKE has taken electronic riders aids to another level for a bike in this class, with an electronics package that is comparable to the KTM 1290 SUPER DUKE R. The secret is minimal interference with the rider experience, meaning all electronic wizardry feels natural, improves performance, power delivery and, most importantly, adds safety.

TRACK MODE
When the urge takes you to the track, we give you, TRACK MODE. Available as an optional addition to the KTM 790 DUKE, TRACK MODE unlocks several track-ready adjustments, such as Traction Control slip adjuster, Anti-wheelie mode, Launch Control, and 3-levels of Throttle Response variation. 

MOTORCYCLE TRACTION CONTROL (MTC)
Motorcycle Traction Control (MTC) is a mouthful, but it’s an important part of the KTM 790 DUKE. MTC is a lean-angle sensitive traction control system, which reduces engine output extremely smooth, barely perceptible. MTC intervention will intervene depending on the selected ride mode, MTC also allows for several levels of traction slip at the rear wheel. But that’s not the end of it – Daredevils, we give you: the off-switch!

QUICKSHIFTER+
The KTM 790 DUKE can be equipped with the race-derived Quickshifter+. This makes shifting gears as fun as it is fast, with upshifts and downshifts being made without using the clutch. The benefits are equally impressive, with shorter shift times, more precision, and improved rear-wheel traction.

MOTOR SLIP REGULATOR
The KTM 790 DUKE can be equipped with MSR (Motor Slip Regulation) as an optional extra. MSR works in the opposite direction of the MTC, this means there is no chance of accidentally locking up the rear wheel under downshifting or abrupt throttling-off. MSR ensures you retain full traction and complements the slipper clutch and is especially effective in low grip situations.

SUPERMOTO MODE
SUPERMOTO MODE allows enthusiastic and experienced riders to lock up the rear wheel – a prerequisite for committed Supermoto riding and deliberately executed slides. This means ABS is deactivated on the rear wheel, while maintaining ABS function on the front.

MOTORCYCLE STABILITY CONTROL (MSC) WITH CORNERING ABS
A key component of the comprehensive BOSCH MSC assistance package is the lean-sensitive cornering ABS. In a nutshell, this means riders have increased confidence during hard braking, even at extreme lean angles.